The primary role of welding inspectors is to assist with:

For employers to have confidence in their work, welding inspectors must:

Visual inspection is classified as:

In demanding service conditions, visual inspection is usually followed by:

Standards and codes typically specify:

Which ISO standard provides guidance for visual inspection?

ISO 17637 provides requirements for:

ISO 17637 requires welding inspectors to have:

How often must welding inspectors’ vision be checked under ISO 17637?

Industry practice requires inspectors to have:

ISO 17637 recommends minimum illumination of:

For visual inspection access, the inspector’s eye should be within:

The minimum viewing angle for direct inspection is:

If access for direct inspection is restricted, ISO 17637 allows use of:

Magnifying lenses for visual inspection should typically be:

Visual inspection is normally performed on welds in which condition?

For high-integrity items such as pressure vessels, inspection is usually required:

Typical documents a welding inspector may need to consult include:

The term “good workmanship” means:

Reference samples are sometimes needed to:

ISO 17637 states visual inspection may be required:

For fabricated items like pressure vessels, inspection is:

A welding inspector should be familiar with:

Quality plans or inspection checklists are used for:

Drawings provide information mainly on:

QC procedures cover aspects like:

Examples of features difficult to define precisely include:

Good workmanship is judged mainly by:

Reference samples may be used for:

Inspection aids must be:

A welding inspector’s duty regarding safety is to:

WPS documents should be:

Welding equipment must be:

Welder qualifications should be:

Welding consumables before welding must be:

Joint fit-ups before welding must be:

During welding, site welding must ensure:

Inter-run cleaning during welding must be:

After welding, weld identification must include:

After welding, weld appearance must ensure:

Visual inspection of welds after welding must be:

Dimensional surveys after welding check:

Modifications during fabrication must be:

NDT reports after welding must be:

Repairs after welding should be:

PWHT (if required) must be:

Pressure or load testing after welding requires:

Documentation and records after welding must be:

The requirement for inspection records depends on:

Sometimes, no inspection record is required:

When inspection records are needed, they show:

Inspection record forms may include:

Typical inspection report details include:

An inspection report must identify:

Acceptance criteria in inspection reports come from:

Imperfections not acceptable must be:

Name and date on inspection report must be of:

Auxiliary lighting may be used to:

Straight edges and measuring tapes are examples of:

Welding gauges are used for:

Dedicated weld gap gauges are mainly used for:

A magnifying lens for inspection should have:

Surface crack detection is a form of:

Volumetric inspection of butt welds is usually carried out using:

Welding inspectors’ familiarity with standards ensures:

Quality plans/checklists help inspectors:

Drawings guide inspectors on:

QC/QA procedures may include:

Welding inspector duties before welding include checking:

Welders must be:

Consumables must be:

Weld faces before welding must be:

Preheat requirements before welding must:

During welding, welding process must be:

Interpass temperature during welding must:

Welding parameters (current, volts, travel speed) must be:

Root run of single-sided welds must be:

Gouging or grinding during welding must be:

Welders performing tasks must be: